ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
 

Tonneau Covers by Unlimited! 
Factory Direct Pricing! From $299.95 Race Weight Style
(not shown)


 
Unlimited Products
Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri
 

 
Part
No
1982-1993 S-10 / S-15 Tonneau Covers (short bed) Notes Racer
Net ($)
Wt
(Lb)*
TG-800T 1982-1993 S-10 / S-15 Cover (75-1/2" long x 63" wide), smooth gray gel coat top "Race Weight", no hardware. Uses 4 to 6 pins (racing type hoods pins)   299.95 60
GS-130 Gas shock for tonneau covers (includes 10mm ball sockets)
110/130 lb capacity, 18-5/8" overall length, 8-1/4" stroke, with ball socket ends
each 49.95  
LK-100-1 Lock for rear of tonneau covers (with 2 matching keys) each 19.95  
LK-100-2 Locks for rear of tonneau covers, set of 2 matching locks & matching keys (total of 4 keys) set 39.90  
Part
No
1994-2002  S-10 / S-15 Tonneau Covers Notes Racer
Net ($)
Wt
(Lb)*
TG-400T 1994-2002 S-10 / S-15 Cover (76-3/4" long x 63-3/4" wide), smooth gray gel coat top "Race Weight", no hardware. Uses 4 pins (racing type hoods pins)   299.95 60
SP-400 94-02 S-10 / S-15 Tonneau Cover Rear Spoiler, 4" high, 62" long (wraps around ends by 10-1/2") ups 169.95  
Part
No
 Tonneau Cover Parts Notes Racer
Net ($)
Wt
(Lb)*
 

 These parts are NOT intended for our "Race Weight" Tonneau's)
These are replacement parts for standard flip up tonneau's

     
GS-130 Gas shock for tonneau covers (includes 10mm ball sockets)*
130 lb capacity, 20" overall length, 8" stroke, with 10mm ball socket ends
each 49.95  
GS-210 Gas shock bracket, flat 2-1/4" x 1-1/2" with 10mm ball each 8.95  
GS-211 Gas shock bracket, angled 2"x1.2"x1.45" with 10mm ball. each 9.95  
LK-100-1 Lock for rear of tonneau covers (with 2 matching keys) each 19.95  
LK-100-2 Locks for rear of tonneau covers, set of 2 matching locks & matching keys (total of 4 keys) set 39.90  
         

Tonneau's listed as "no shocks and locks" or listed as "Race Weight" do not come with gas shocks (2 required) and no locks for holding rear down (2 required). A prop rod can be used in place of gas shocks. 

This is a list of what comes with the "stripped down" model:
1. Tonneau Cover, gray color only. Leave gray or you can paint to match your truck.
2. Posi-Lock trim for edges and narrow rubber cushion pads for sides. (installed)
3. Front hinge hardware for mounting to truck.  (stainless steel)
4. Plates with 10mm ball are fully molded in, ready for the upper end of your gas shock 
     (recommended gas shock= 18-5/8" overall length-extended and 8-1/4" stroke, 
       with approx. 110 to 130 lbs pressure and needs 10mm ball socket ends).
5. Plates with 10mm ball and screws for mounting to inner side of bed.  (stainless steel)
    (lower end of gas shock will  attach here.)
6. Instructions
7. Full factory warranty.
8. No extra charge for packaging.

This is a list of what comes with the "Complete" model:
("Complete" models no longer available)
1. Tonneau Cover, gray color only. Leave gray or you can paint to match your truck.
2. Posi-Lock trim for edges and narrow rubber cushion pads for sides.(installed)
3. Front hinge hardware for mounting to truck. (stainless steel)
4. Plates with 10mm ball are fully molded in.  (stainless steel)
5. Gas shocks (2), with heavy duty nylon ball ends.
6. Plates with 10mm ball and screws for mounting to inner side of bed
    (lower end of gas shock will  attach here.)  (stainless steel)
7. Cam - Locks with keys for locking down back of cover.
8. Lock "catch" (2) and screws. This is where the locks "lock" into.
9. Instructions.
10. Full factory warranty.
11. No extra charge for packaging.

This is a list of what comes with the "Race Weight" model:
1. Tonneau Cover, gray color only. Leave gray or you can paint to match your truck.
2. Instructions.
3. Full factory warranty.
 

Complete and stripped down model tonneau covers come with: Front hinges and hardware for mounting hinges, plates installed with 10mm ball for mounting gas shocks, plates with 10mm ball and hardware for gas shocks to side of truck bed.


We ship these tonneau's direct from our factory in Hesperia. They are carefully packaged and fully insured against damage or loss and carry our full factory warranty!
ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri




Heavy duty "Hand laid" fiberglass construction. A full size core is molded in for maximum rigidity!
Top side is "smooth" gray gel coat. This coating need not be painted.
Can be easily painted to match your truck.
All necessary components are molded in for easy mounting to your truck.
Installs in 10 minutes. 
All models come with mounting instructions.
"Angle mounting" design of gas shocks will hold lid "solidly" in up position. 
When placed in down position, lid 'stays down' even without locks!
Locks are keyed alike.
Comes complete with trim and front hinge hardware.
Trim is posi-lock style, will not work loose.
Metal hardware is all stainless steel or plated...will not rust.





Locks (2), one on each side with matching keys.

Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright 2013 Unlimited Products. All rights reserved.