ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
  70ElCaminoa.jpg (6861 bytes)  

CHEVELLE 1968 - 1972

Unlimited Products (760) 948-0055
 Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) M-F

               
                   
     
   
   

Part Number H72
1971-1972 Chevelle Front Bumper
$129.95

   
                             
             
                                     
Part
No
1968 Chevelle & 1969 Chevelle Notes Racer
Net
($)
Wt
(L)
*
 

 

 

 

HOODS

H-101 1968 Chevelle stock flat hood, pin front (also for 1969 Chevelle) H 299.95 24
H-191 1968 Chevelle stock flat hood, front latching style (also for 1969 Chevelle) H 355.00 26
H-855 SS HOOD (Rear Vent Panels Not Included), pin front H 299.95 20
H-855B SS Hood (Rear Vent Panels Not Included), Front Latching H 369.95 29
H-805 5" Snorkel Hood, Pin Front H 370.00 26
H-805B 5" Snorkel Hood, Front Latching H 409.00
H-807 7" Snorkel Hood, Pin Front H 370.00 24
H-807B 7" Snorkel Hood, Front Latching H 409.00
H-828 Hood with 2-1/4" Cowl Induction Scoop, pin front H

269.95

20
H-891 Hood with 2-1/4" Cowl Induction Scoop, Front Latching H 355.00 26
H-883 3-1/2" Cowl Induction Hood, pin front H 339.00
H-893 3-1/2" Cowl Induction Hood, Front Latching H 459.00
H-885 68-69 CHEVELLE 4-3/4" HI COWL INDUCTION HOOD, pin front H 339.00 24
H-895 68-69 CHEVELLE 4-3/4" HI COWL INDUCTION HOOD, Front Latching H 379.95 29
H-886 6" HIGH COWL INDUCTION HOOD H 399.00 25
H-896 6" High Cowl Induction Hood, Front Latching H 409.00
H-887 7" HIGH COWL INDUCTION HOOD H 439.00
H-897 7" High Cowl Induction Hood, Front Latching H 509.00
H-889 9" HIGH COWL INDUCTION HOOD H 539.00
H-899 9" High Cowl Induction Hood, Front Latching H 569.00
Other
Parts
H-802R&L FRONT FENDERS Each 199.95 10
H-245R&L Front Inner Fenders '68-72 Each 85.00 6
H-803 TRUNK LID (PIN ON) (ups ok) P 149.95 12
H-803H TRUNK LID BOLTS TO HINGES (ups ok) H 189.95 15
H-817 FRONT UPPER PANEL (IN FRONT OF HOOD) (ups ok) 109.95 3
H-810 FRONT BUMPER, FIBERGLASS 68 ONLY (ups ok) 129.95 3
H-811 REAR BUMPER, FIBERGLASS 68 ONLY (not El Camino) (ups ok) 129.95 3
H-910 FRONT BUMPER, FIBERGLASS 69 ONLY (ups ok) 129.95 3
H-911 REAR BUMPER, 69 ONLY (not El Camino) (ups ok)

        129.95

3
H-818A,B,C,D Front BUMPER BRACKETS (not El Camino) (ups ok) 4 required.     H818A is $33, H818B is $33 etc. Each 33.00 1
H-819R&L Rear BUMPER BRACKETS (not El Camino) (ups ok) 2 required.      H819R is $33, H819L is $33 Each 33.00 1
         
Part
No
1968 Chevelle & 1969 Chevelle "Race Weight Hoods" Notes Racer
Net
($)
Wt
(L)
*
H-101T 1968 Chevelle stock flat hood, pin front (also for 1969 Chevelle), Full Pin On   249.95 20
H-855T SS HOOD (Rear Vent Panels Not Included), Full Pin On   249.95 18
H-805T 5" Snorkel Hood, Full Pin On   329.95 24
H-807T 7" Snorkel Hood, Full Pin On   329.95 20
H-828T Hood with 2-1/4" Cowl Induction Scoop, Full Pin On  

299.95

18
H-883T 3-1/2" Cowl Induction Hood, Full Pin On   299.95 22
H-885T 68-69 CHEVELLE 4-3/4" HI COWL INDUCTION HOOD, Full Pin On   299.95 20
H-886T 6" HIGH COWL INDUCTION HOOD, Full Pin On   379.95 21
H-887T 7" HIGH COWL INDUCTION HOOD, Full Pin On   399.95 22
H-889T 9" HIGH COWL INDUCTION HOOD, Full Pin On   430.00 22
1968 Chevelle, 1969 Chevelle, 1970 Chevelle, 1971 Chevelle, 1972 Chevelle
Part
No
1970-1972 Chevelle Notes Racer
Net
($)
Wt
(lb)
*
HOODS H-102 Stock Flat Hood, Front Pin on H 249.00 19
H-102B Stock Flat Hood, Front Latching H 355.00
H-128 SS HOOD (COWL INDUCTION) NO FLAPPER, 1" high H 249.00 20
H-291 SS HOOD FRONT LATCHING (same as H128 except uses front latch) H 355.00 26
H-205 HOOD WITH 5" SNORKEL, Pin H 370.00 20
H-205B 5" Snorkel Hood, Front Latching H 409.00
H-207 HOOD WITH 7" SNORKEL, Pin H 370.00 20
H-207B 7" Snorkel Hood, Front Latching H 409.00
H-283 3-1/2" HIGH COWL INDUCTION HOOD, Pin H 339.00 24
H-293 3-1/2" HIGH COWL INDUCTION HOOD FRONT LATCHING H 409.00 29
H-285 4-3/4" HIGH COWL INDUCTION HOOD, Pin H 339.00 25
H-295 4-3/4" HIGH COWL INDUCTION HOOD FRONT LATCHING H 409.00 32
H-286 6" HIGH COWL INDUCTION HOOD , Pin H 455.00 26
H-296 6" High Cowl Induction Hood, Front Latching H 509.00
H-287 7" HIGH COWL INDUCTION HOOD , Pin H 455.00 29
H-297 7" High Cowl Induction Hood, Front Latching H 509.00
H-289 9" HIGH COWL INDUCTION HOOD, Pin H 509.00 32
H-299 9" High Cowl Induction Hood, Front Latching H 569.00
Other
Parts
H-206R&L 70-72 FRONT FENDERS (not El Camino) Each 199.95 9
H-203 TRUNK LID (PIN ON) (UPS ok) P 149.95 12
H-203H TRUNK LID BOLT ON (UPS ok) H 179.95 15
H-212R&L 70-72 DOORS WITH INNER STRUCTURE (not El Camino) (UPS ok) Each 199.95 10
H-245R&L 68-72 INNER FENDER WELLS, CHEVELLE & EL CAMINO (UPS ok) Each 85.00 6
H-70 FRONT BUMPER, FIBERGLASS (FITS 70) (UPS ok) 129.95 3
H-72 FRONT BUMPER, FIBERGLASS (FITS 71 & 72)  (UPS ok) 129.95 3
H-73 REAR BUMPER, FIBERGLASS (FITS 71 & 72) (not El Camino) (ups ok) 129.95 3
H-219R&L FRONT BUMPER BRACKETS (Ups ok) Each 33.00 1
NOTES: * All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Pin on only .
Part
No
1970-1972 Chevelle "Race Weight Hoods" Notes Racer
Net
($)
Wt
(lb)
*
H-102T Stock Flat Hood, Front Pin on   229.95 17
H-128T SS HOOD (COWL INDUCTION) NO FLAPPER, 1" high   229.95 18
H-205T HOOD WITH 5" SNORKEL, Pin   329.95 18
H-207T HOOD WITH 7" SNORKEL, Pin   329.95 18
H-283T 3-1/2" HIGH COWL INDUCTION HOOD, Pin   279.95 22
H-285T 4-3/4" HIGH COWL INDUCTION HOOD, Pin   279.95 23
H-286T 6" HIGH COWL INDUCTION HOOD , Pin   399.95 23
H-287T 7" HIGH COWL INDUCTION HOOD , Pin   399.95 24
H-289T 9" HIGH COWL INDUCTION HOOD, Pin   430.00 28
NOTES: * All Weights are approximate
PICTURES AND FURTHER INFORMATION FOR CHEVELLE 68 - 72
can be viewed by scrolling down or clicking part number above.
ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

H-101
Standard flat hood is a replica of the original 68-69 Chevelle. Full hollow style inner structure allows easy mounting to original hinges. Molded edges insure a perfect fit.
Note: All 68 & 69 Chevelle hoods come with 3 bolt locations on each side in the rear for mounting to the hinges. When mounting, only use 2. These are produced in this manner so that they can used on either 68 or 69 Chevelles.h-101.JPG (4723 bytes)

   LogoH100opt.jpg (1974 bytes)
UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA.

H-828
Bolts to the stock hinges and has a 69 Camaro style cowl induction scoop. 2 -1/4" extra clearance over a standard flat hood. Cowl induction scoop allows air to enter the engine area for increased performance.
Underside has rigid inner structure similar to original OEM inner structure.
3 models to chose from:
Full pin on (race style) H828T
Semi bolt on (bolts to hinges, pin front) H828
Full bolt on (bolts to hinges and uses front latch) H891
                       
  h-828.JPG (7715 bytes)            
             
             
             
                       
                       
                       
                       

h-885.JPG (5358 bytes)H-885 & H-895
H-885-HI-RISE "Out -law" 4-3/4 hi cowl induction hood for 68-69 Chevelle and El Camino.  Inner structure for bolting to hinges.
h885opt.jpg (2002 bytes) 
H-895 bolts to hinges in the rear but also uses front latch. Cowl scoop overhangs rear of hood by 3-1/4".

h-805.jpg (14481 bytes)H-805
Snorkel air induction is built into this design. Offering 5" in overall height it features internal flange for using an air pan kit. Full inner structure insures light weight and high strength.

h-102.JPG (8975 bytes)H-102
This hood (designed for 70-72 models), made of high quality lightweight fiberglass, is intended as a replacement for original stock flat hoods. This hood has a fully braced inner structure which is constructed of hand laid fiberglass.

h-807.JPG (9808 bytes)H-807
Designed to offer extra clearance for hi-rise manifolds and carbs. Extra bracing is provided on all Unlimited hoods to eliminate sagging in the middle. Molded edges are standard for a good fit.

LogoH100opt.jpg (1974 bytes)

h-128.JPG (6814 bytes)H-128
Made in the Super Sport design, this hood is constructed to increased air flow to the air filter and carburetor. This hood (as are all Chevelle hoods), has molded steel inserts, providing secure mounting to the hinges. Pins for the front are recommended.

h-855.JPG (7234 bytes)H-855
This is a replica of the 68-69 Chevelle SS hood. It features rolled edges on all sides to insure a perfect fit. Original chrome louvers can be installed. A full inner structure eliminates sagging and allows this hood to be bolted to the original hinges.
Note: All 68 & 69 Chevelle hoods come with 3 bolt locations on each side in the rear for mounting to the hinges. When mounting, only use 2. These are produced in this manner so that they can used on either 68 or 69 Chevelles.

h-205.JPG (6446 bytes)H-205
Made with a five inch snorkel arrangement, this hood is designed with extra clearance in mind. Overall height including snorkel top is 5 inches. Recommended for those with something extra under the hood.

h-802.JPG (5493 bytes)H-802R/L
Made to withstand everyday street use, yet light enough for racing application. These fenders will easily bolt to the original mounting locations. Extra reinforcement is added along door edge.

h-207.JPG (6935 bytes)H-207
Designed with an overall height of seven inches. Our hood is constructed of top quality, lightweight fiber-glass. Extra clearance (7 inches) is provided for high rise carburetor.
h-803 & h-203.jpg (2996 bytes)H-803 & H-203
Pin on design for low weight. Rolled edges will insure a perfect fit. All Unlimited fiberglass parts feature proper gel coat surface to provide easy sanding in preparation for primer or painting. H803H & H203H feature full inner structure for more rigidity and also have small steel threaded inserts for bolting to original hinges and installing original latch.
h289opt3.gif (3615 bytes)
H-289
9 inch high cowl induction hood for 70-72 Chevelle.
LogoH100opt.jpg (1974 bytes)

h-206.JPG (5810 bytes)H-206
Made to stand up to use on the street, these fenders will easily bolt to original mounting locations. Cannot be used on El Camino body style.
h-206f.JPG (8036 bytes)H-206F
Front View of 70 70-72 Chevelle fenders.

h-819.JPG (9141 bytes)H-819 Right and Left
Fiberglass bumper brackets will securely hold a fiberglass bumper. These brackets attach to original locations.

H-818 A,B,C,D            "NEW ITEMS"
Light weight and strong, front bumper brackets for 1968 and 1969 Chevelle. Set of 4 fiberglass brackets.
Designed from original GM shape and mount to original locations.

 

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA.

h-219.JPG (7055 bytes)H-219R/L
Front bumper brackets for 70- 72 Chevelle fiberglass bumpers. These brackets are replicas of originals and can be bolted to original locations.

h-73.JPG (2320 bytes)H-73

71-72 Chevelle rear bumper

h-212.JPG (3158 bytes)H-212R/L
H212R/L 70-72 Chevelle fiberglass doors. Features full replica inner structure for mounting to hinges. Latches and handles can be installed. Will not fit El Camino.
h-817.JPG (2998 bytes)H-817
Replaces original upper header panel. Made of high strength fiberglass. Will never rust from road conditions. Original grill can be installed.

h-72.JPG (3219 bytes)H-72
Designed for the 71-72 model Chevelle or El Camino this bumper will bolt to your original brackets or to our fiberglass brackets.

h-810.JPG (3400 bytes)H-810
This fiberglass replica bumper is designed to bolt to original brackets. Strength and durability make this bumper ideal.

h-70.JPG (4163 bytes)H-70
Designed for the 70 model only, this front bumper has the square parking light holes cut out.

h-910.JPG (3655 bytes)H-910
Made from high strength fiberglass mat and cloth. This bumper can bolt to original mounting brackets. (Will not fit 68.)

h-811.JPG (3396 bytes)H-811
Rear bumper for 68 Chevelle.  Full fiberglass construction.  Bolts to original bumper brackets (will not fit El Camino).
h-911.JPG (20340 bytes)H-911
Further weight reduction is accomplished by replacing original with this fiberglass reproduction. All contours are designed to match the original (will not fit 68 and El Camino).
H-889 
9 inch high cowl induction hood for the 68-69 Chevelle. Features smooth gray gel coat finish. complete inner structure for rigidity and strength. Small steel inserts firmly molded for easy attachment to the hinges. Original springs must be removed. For front latching style, order H-899.

 

h-245.JPG (6388 bytes)H-245R/L
Front inner fender wells for 68-72 Chevelles & El Caminos. Replicas of original parts, except they are made from durable fiberglass. They will not rust or deteriorate from road, weather or battery. Will bolt to original locations. Holds battery tray.
69Chevelle.jpg (12048 bytes)  
                                                                                                                      H102 with AC952

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA.

Hood Notes:
Front latch style hoods have provision for latching the front down just like the original.
Front latching hoods cost more because they have extra steel reinforcements made into them.
The other style (pin down) uses racing type hood pins to hold down the front. These cannot be converted to a latching style.
You must drill holes in the front area of the hood for the pins, the pins attach to the radiator core support.
Both styles (latching and pin type) bolt to the original hinges in the rear. Bolts are included. Hood hinge springs must be removed and replaced with our low tension springs or a prop rod.
72ChevelleSS.jpg (14431 bytes)                  72ChevelleConv.jpg (12564 bytes)

ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) M-F

LogoH250opt.jpg (6243 bytes)

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright 2013 Unlimited Products. All rights reserved.
Follow us on FaceBook at "Unlimited Fiberglass"

Copyright 2007 Unlimited Performance Products. All rights reserved. UP22.com, UnlimitedProducts.com, RaceHoods.com