ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
                                       
           


Giant Catalog with over 3000 fiberglass parts

 
 


PL744

     
       
       
             
       

1970-1972 & 1973-1976 DUSTER & VALIANT

Unlimited Products (760) 948-0055
Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

 
         
         
               
               
                                       
Part
No
1970-1972 Duster & Valiant
(These items also fit 1969 Plymouth Valiant)
Notes Racer Net
($)
Wt
(Lb)*
 

 

 

 

 

 

 

 

 

Hoods

PL-106 70-72 Standard Flat hood (DUSTER & VALIANT), Pin front H 259.00 20
PL-790 1970 - 1972 Duster stock flat hood, front latching style H 299.00 26
PL-783 3-1/2" Cowl Induction Hood (pin on) H 419.00 24
PL-793 3-1/2" Cowl Induction Hood, Front Latching H 449.00 32
PL-785 4-3/4" Cowl Induction Hood (pin on) H 419.00 25
PL-795 4-3/4" Cowl Induction Hood, Front Latching H 449.00 32
PL-786 6" Cowl Induction Hood (pin on) H 419.00 26
PL-796 6" Cowl Induction Hood, Front Latching H 449.00 33
PL-787 7" Cowl Induction Hood (pin on) H 470.00 27
PL-797 7" Cowl Induction Hood, Front Latching H 509.00 33
PL-789 9" Cowl Induction Hood (pin on) H 470.00 30
PL-799 9" Cowl Induction Hood, Front Latching H 520.00 38
PL-744 70-72 DUSTER HOOD w/SIX PAC SCOOP (PR5 SCOOP)  (pin on) H 419.00 24
PL-744B 70-72 DUSTER HOOD w/SIX PAC SCOOP (PR5 SCOOP), Front Latching H 459.00 24
PL-702 70-72 DUSTER w/HEMI-CUDA SCOOP (SC102 SCOOP  (pin on) H 419.00 23
PL-702B 70-72 DUSTER HOOD w/Hemi-Cuda SCOOP (PR5 SCOOP), Front Latching H 459.00 24
PL-725 70-72 HOOD WITH 5" SNORKEL  (pin on) H 365.00 24
PL-727 70-72 HOOD WITH 7" SNORKEL  (pin on) H 365.00 24
PL-305R&L 70-76 FRONT FENDERS (ups ok) fits '67 Valiant Each 189.00 8
PL-306R&L 70-76 HEADLIGHT BUCKETS (SINGLE LIGHT) (ups ok) Each 49.00 1
PL-703 70-76 Trunk Lid, Full Pin on (Fits Demon, will not fit Valiant or Scamp)   159.95 12
PL-703H 70-76 Trunk Lid, Hinge type (Fits Demon, will not fit Valiant or Scamp)   189.95 16
PL-710 70-72 FRONT BUMPER, FIBERGLASS (for Demon use DD-210, see Dart) (ups ok) 129.95 3
PL-711 70-72 REAR BUMPER, FIBERGLASS (ok for Demon) (ups ok) 129.95 3
PL-712R/L 70-76 Doors, Right & Left Each 199.95 12
Part
No
1970-1972 Duster, Valiant & Scamp "Race Weight Hoods"
(These items also fit 1969 Plymouth Valiant)
Notes Racer Net
($)
Wt
(Lb)*
PL-106T 70-72 Standard Flat hood (DUSTER & VALIANT), Full Pin-on   229.95 17
PL-783T 3-1/2" Cowl Induction Hood, Full Pin-on   389.95 20
PL-785T 4-3/4" Cowl Induction Hood, Full Pin-on   389.95 21
PL-786T 6" Cowl Induction Hood, Full Pin-on   389.95 21
PL-787T 7" Cowl Induction Hood, Full Pin-on   389.95 22
PL-789T 9" Cowl Induction Hood, Full Pin-on   419.95 22
PL-744T 70-72 DUSTER HOOD w/SIX PAC SCOOP (PR5 SCOOP), Full Pin-on   389.95 22
PL-702T 70-72 DUSTER w/HEMI-CUDA SCOOP (SC102 SCOOP), Full Pin-on   389.95 21
PL-725T 70-72 HOOD WITH 5" SNORKEL, Full Pin-on   349.95 20
PL-727T 70-72 HOOD WITH 7" SNORKEL, Full Pin-on   349.95 20
Part
No
1973-1976 Duster, Valiant & Scamp Notes Racer Net
($)
Wt
(Lb)*
PL-301 73-76 STOCK HOOD  (pin on) H 259.00 20
PL-383 73-76 3-1/2" Cowl Induction Hood (pin on) H 419.00 26
PL-385 73-76 4-3/4" Cowl Induction Hood (pin on) H 419.00 27
PL-386 73-76 6" Cowl Induction Hood (pin on) H 419.00 28
PL-387 73-76 7" Cowl Induction Hood (pin on) H 470.00 30
PL-389 73-76  9" Cowl Induction Hood (pin on) H 519.00 31
PL-344 73-76 DUSTER SIX PAC HOOD (PR5 SCOOP)  (pin on) H 410.00 26
PL-302 73-76, Hemi-Cuda Hood, (pin on) H 410.00 26
PL-325 73-76 HOOD WITH 5" SNORKEL (pin on) H 365.00 24
PL-327 73-76 HOOD WITH 7" SNORKEL  (pin on) H 345.00 24
PL-305R&L 70-76 FRONT FENDERS (ups ok) fits '67 Valiant Each 189.00 8
PL-306R&L 70-76 HEADLIGHT BUCKETS (SINGLE LIGHT) (ups ok) Each 49.00 1
PL-310 73-76 FRONT BUMPER, FIBERGLASS (UPS OK) 129.95 3
PL-311 73-76 REAR BUMPER, FIBERGLASS (UPS OK) 129.95 3
PL-319R&L 73-76 FRONT BUMPER BRACKETS (2 REQUIRED) ups Each 33.00 1
PL-320R&L 73-76 REAR BUMPER BRACKETS (2 REQUIRED) ups Each 33.00 1
PL-712R&L 70-76 DOORS W/INNER STRUCTURE (ups ok) Each    199.95 9
PL-703 70-76 TRUNK LID (PIN ON) NOT VALIANT OR SCAMP, ok Demon (not ups) P 149.95 8
PL-703H 70-76 TRUNK LID (BOLT ON) NOT VALIANT OR SCAMP, ok Demon (not ups) H 169.95 12
Part
No
1973-1976 Duster, Valiant & Scamp "Race Weight Hoods" Notes Racer Net
($)
Wt
(Lb)*
PL-301T 73-76 STOCK HOOD, (Full pin on)   229.95 18
PL-383T 73-76 3-1/2" Cowl Induction Hood, (Full pin on)   389.95 24
PL-385T 73-76 4-3/4" Cowl Induction Hood, (Full pin on)   389.95 25
PL-386T 73-76 6" Cowl Induction Hood, (Full pin on)   389.95 25
PL-387T 73-76 7" Cowl Induction Hood, (Full pin on)   419.95 25
PL-389T 73-76  9" Cowl Induction Hood, (Full pin on)   419.95 26
PL-344T 73-76 DUSTER SIX PAC HOOD (PR5 SCOOP), (Full pin on)   389.95 22
PL-302T 73-76, Hemi-Cuda Hood, (Full pin on)   389.95 22
PL-325T 73-76 HOOD WITH 5" SNORKEL, (Full pin on)   349.95 20
PL-327T 73-76 HOOD WITH 7" SNORKEL, (Full pin on)   349.95 20
Part
No
1966-1967 Plymouth Valiant Notes Racer
Net
($)
Wt
(Lb)*
PL-305R&L 67 VALIANT FRONT FENDERS (same as 70-72 Duster) ups Each 199.00 8
PL-306R&L 67 VALIANT HEAD LIGHT BUCKETS (same as Duster) Each 47.00 1
PL-710 67-72 VALIANT FRONT BUMPER 129.95 3
PL-711 67-72 VALIANT REAR BUMPER 129.95 3
NOTES: * All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Pin on only .
PICTURES AND FURTHER INFORMATION FOR
DUSTER & VALIANT 67, 70-72 &  73-76
can be viewed by scrolling down or clicking part number above.
ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

PL-106
Unlimited Products uses only heat resistant resin to manufacture parts. Hoods made with this resin will not warp or distort from the heat of the engine. This hood is used to mount the scoop of your choice. Features rolled edges on all sides to insure a perfect fit. Hinges can be used.
UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory.

PL-703
Light weight and strength are built into this fully hand laid fiberglass trunk lid. Minimal bracing is laminated to the underside to allow some rigidity yet keep weight low. Rolled edges on all sides insure a perfect fit. Use racing style hood pins to mount this trunk lid.


PL744
1970-1972 Duster Hood with PR5 (Six Pack)
Scoop starts at 3-1/2" from back of hood and sides are 15" from side of hood.

 
PL-786
6 inch cowl induction hood, for the 70-72 Plymouth Duster. Features smooth gray gel coat surface and replica under-bracing for durability and strength. Underside is "open" under scoop for maximum carb/manifold clearance. Rolled edges on all sides insure perfect fit.
3 models to choose from, front latching (PL796), pin front (PL786) or full race pin on (PL786T).


PL-387
7 inch cowl induction hood, for the 73-76 Plymouth Duster. Features smooth gray gel coat surface and replica under-bracing for durability and strength. Underside is "open" under scoop for maximum carb/manifold clearance. Rolled edges on all sides insure perfect fit.
3 models to choose from, (PL387) pin front or full race pin on (PL387T).

PL-710
Front fiberglass bumper will help reduce overall weight of the car for racing applications. Sturdy enough for all-out racing and can be bolted to original brackets. Paint flat black or silver.

PL-711
Rear bumper. Not chrome. Easily bolts to original brackets or can be bolted to lightweight fabricated brackets. Outer surface is quality fiberglass gel coat. Entire bumper is made from durable hand laid fiberglass, to resist cracking and chipping.

pl-712.JPG (4474 bytes)PL-712
These doors feature a full inner structure for bolting to original hinges. Stock door handle and latch install with little effort. Our doors come with a reverse flange at top of door to bolt on Lexan windows. Not recommended for street use.

pl-306.JPG (5974 bytes)PL-306
Front headlight buckets. Designed to bolt on or be bonded into the    fiberglass   fenders. These buckets are necessary when using the original headlights. Shown here is an enlarged view to indicate detail.                 

PL-305R/L
Made to withstand every-day street use, yet light enough for your racing application. These fenders will bolt to all original mounting locations. Extra reinforcement is added along door edge. Fits 70-76 Duster.

PL-319R/L
Front fiberglass bumper brackets. The stock brackets were designed to withstand all-out crashes, but they were not practical for light weight street or strip use. These replacement brackets are shortened replicas of the original bracket. Only the overall length has been changed, not the top to bottom fit. Use a right and left for mounting a front bumper. Not for use with a steel front bumper.

PL-301
Excellent for street or strip, includes fully bonded inner structure for maximum strength. Molded in steel inserts provide secure mounting to hinges (hinge use optional). Use this hood to mount the scoop of your choice. Four pins can be used for racing application. Rolled edges on all sides insure a perfect fit.

PL-310
Front bumper provides light weight but strong enough for everyday use. Can be bolted to original brackets or can be bolted to our light weight brackets (see # PL319). These brackets are for 'shock' type bumpers.

PL-320
Rear fiberglass bumper brackets. The stock rear brackets were also designed to withstand all-out crashes, but not practical for racing applications. These replacement brackets are also 2-piece shortened replicas of the original bracket. Only the overall length has been changed, not the top to bottom fit. Not for use with steel rear bumper.
PL-311
Rear fiberglass replica bumper. Can easily be bolted to original brackets or to our PL320 brackets. Paint flat black or the color of the car. Quality fabricated from hand-laid fiberglass. Outer surface of all bumpers is smooth grey gelcoat. These brackets are for 'shock' type bumpers.

ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory.

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright 2013 Unlimited Products. All rights reserved.
Follow us on FaceBook at "Unlimited Fiberglass"

Copyright 2007 Unlimited Performance Products. All rights reserved. UP22.com, UnlimitedProducts.com, RaceHoods.com