ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
mz185opt.jpg (2453 bytes)

MONZA 1975- 1980 & SKYHAWK

MONTE CARLO 1981-1988


Unlimited Products (760) 948-0055
Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

Go to Monte Carlo

Part
No
1975 - 1980 Monza's Notes Racer
Net ($)
Wt   (Lb)*
MZ-101 75-79 STOCK HOOD, Pin, (4 headlight only) H 249.00 20
MZ-128 75-79 HOOD W/COWL INDUCTION SCOOP 2-1/4" HI, Pin,  
(4 headlight only)
H 259.00 20
MZ-183 75-79 3-1/2 Cowl induction hood, Pin,  (4 headlight only) H 399.00 26
MZ-185 75-79 4-3/4 Cowl induction hood, Pin,  (4 headlight only) H 399.00 26
MZ-186 75-79 6 inch Cowl induction hood, Pin,  (4 headlight only) H 399.00 28
MZ-187 75-79 7 inch Cowl induction hood, Pin,  (4 headlight only) H 399.00 30
MZ-189 75-79 9 inch Cowl induction hood, Pin,  (4 headlight only) H 399.00 30
MZ-103 75-79 HOOD W/7" WINDSHIELD SNORKEL, Pin on P 419.00 18
MZ-125 75-79 HOOD WITH 5" SNORKEL, Pin,  (4 headlight only) H 345.00 22
MZ-127 75-79 HOOD WITH 7" SNORKEL, Pin,  (4 headlight only) H 345.00 22
MZ-286 HOOD WITH AERODYNAMIC SCOOP 8" HI (MZ286 HAS SCOOP ATTACHED),  (4 headlight only) 490.00 25
MZ-106R&L 75-80 FRONT FENDERS (ups ok) Each 169.00 7
MZ-107R&L 75-80 DOORS WITH INNER STRUCTURE UPPER WINDOW FRAMES BUILT IN (not for coupe or wagon) Each 225.00 10
MZ-105 75-80 HATCH (PIN ON) P 169.95 10
MZ-108 75-79 FRONT NOSE (QUAD LIGHTS) 299.00 13
MZ-109 75-79 REAR BUMPER CLIP (ups ok) 299.00 12
MZ-601 F/E KIT: MZ101, MZ106R&L, MZ108 629.00 43
MZ-602 F/E KIT: MZ125, MZ106R&L, MZ108 770.00 45
MZ-603 F/E KIT: MZ127, MZ106R&L, MZ108 770.00 45
MZ-607 F/E KIT: MZ103, MZ106R&L, MZ108 799.00 48
MZ-686 F/E KIT: MZ286, MZ106R&L, MZ108
MONZA WAGON: USE VEGA HOODS, V128, V101 ETC.
929.00 52
Part
No
1975 - 1980 Monza "Race Weight" Hoods Notes Racer
Net ($)
Wt
  (Lb)*
MZ-101T 75-79 STOCK HOOD, (4 headlight only), Full pin on   219.95 18
MZ-128T 75-79 HOOD W/COWL INDUCTION SCOOP 2-1/4" HI, Full pin on
(4 headlight only)
  229.95 18
MZ-183T 75-79 3-1/2 Cowl induction hood (4 headlight only), Full pin on   359.95 23
MZ-185T 75-79 4-3/4 Cowl induction hood  (4 headlight only), Full pin on   359.95 24
MZ-186T 75-79 6 inch Cowl induction hood  (4 headlight only), Full pin on   359.95 25
MZ-187T 75-79 7 inch Cowl induction hood (4 headlight only), Full pin on   369.95 26
MZ-189T 75-79 9 inch Cowl induction hood  (4 headlight only), Full pin on   399.95 26
MZ-103T 75-79 HOOD W/7" WINDSHIELD SNORKEL, Full pin on   379.00 24
MZ-125T 75-79 HOOD WITH 5" SNORKEL (4 headlight only), Full pin on   329.95 18
MZ-127T 75-79 HOOD WITH 7" SNORKEL  (4 headlight only), Full pin on   329.95 18
MZ-286T HOOD WITH AERODYNAMIC SCOOP 8" HI (MZ286 HAS SCOOP ATTACHED),  (4 headlight only), Full pin on 490.00 22
  These parts fit 4 headlight version of 1975 Monza, 1976 Monza, 1977 Monza, 1978 Monza and 1979 Monza      
Part
No
1981 - 1988 Monte Carlo's Notes Racer
Net ($)
Wt
  (Lb)*
MC-828 2-1/4 Cowl induction hood H 259.00 22
MC-891 2-1/4 Cowl induction hood, front latching H 365.00 29
MC-883 3-1/2 Cowl induction hood H 389.00 24
MC-893 3-1/2 Cowl induction hood, front latching H 469.00 31
MC-885 4-3/4 Cowl induction hood H 389.00 24
MC-895 4-3/4 Cowl induction hood, front latching H 469.00 31
MC-886 6 inch Cowl induction hood H 389.00 24
MC-896 6 inch Cowl induction hood, front latching H 469.00 31
MC-887 7 inch Cowl induction hood, pin H 409.00 26
MC-897 7 inch Cowl induction hood, front latching H 489.00 32
MC-889 9 inch Cowl induction hood, pin H 419.00 36
MC-899 9 inch Cowl induction hood, front latching H 509.00 32
MC-805R&L Front fenders each 185.00 9
MC-825R/L Monte Carlo front inner fenders each 85.00 6
908 Low tension hood hinge springs for MC828 & MC891 pair 21.95 1
NOTES: * All Weights are approximate
H- Has small steel inserts for mounting to hinges
P- Pin on only .
Part
No
1981 - 1988 Monte Carlo's "Race Weight" Hoods Notes Racer
Net ($)
Wt
  (Lb)*
MC-828T 2-1/4 Cowl induction hood, Full pin on   229.95 20
MC-883T 3-1/2 Cowl induction hood, Full pin on   359.95 20
MC-885T 4-3/4 Cowl induction hood, Full pin on   359.95 21
MC-886T 6 inch Cowl induction hood, Full pin on   369.95 21
MC-887T 7 inch Cowl induction hood, Full pin on   389.95 22
MC-889T 9 inch Cowl induction hood, Full pin on   409.95 24
These parts fit 1981 Monte Carlo, 1982 Monte Carlo, 1983 Monte Carlo, 1984 Monte Carlo, 1985 Monte Carlo, 1986 Monte Carlo, 1987 Monte Carlo and 1988 Monte Carlo
PICTURES AND FURTHER INFORMATION FOR
Monza  & Monte Carlo
can be viewed by scrolling down or clicking part number above.
ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

mz-101.jpg (7149 bytes)MZ-101
This hood features a full inner structure for rigidity and has mounting bolts for bolting to hinges. This hood can be used to mount the scoop of your choice or for your stock application. Stock hinges must be altered to install this hood to hinges.

mz-105.jpg (4269 bytes)MZ-105
Hatch is designed for use with racing style hood pins or Dzus fasteners. Must use Lexan for the window. Rolled edges on all sides insure a perfect fit. Has recessed flange for mounting Lexan window.

mz-103.jpg (7497 bytes)MZ-103
Extra clearance built into this hood for higher carburetion. Open bottom allows for maximum clearance when installing higher carburetion. This hood features the same strong inner bracing as our flat hood. Use racing style hood pins for a perfect fit.

mz-106.jpg (6460 bytes)MZ-106
Unlimited's fenders of high quality fiberglass resist dings and dents and will never rust out or deteriorate from harsh weather or road conditions. Durability and strength are the key factors when using our fenders. These fenders feature all mounting tabs for bolting to stock locations.

mz-125.jpg (7107 bytes)MZ-125
Street to strip, everyday driving to weekend racing, Unlimited's hoods will provide that winning edge over the competition. This hood features a full inner structure for maximum strength and durability. Scoop base fully molded in and snorkel top is supplied unattached. This hood has rolled edges on all sides.

mz-128.jpg (8046 bytes)MZ-128
This hood features the famous 69 Camaro cowl induction scoop. This hood will give your car that low sleek look yet gives you an additional 2 1/4 inches over a stock hood. Designed to bolt to hinges, and bolts are included. Rolled edges on all sides allows for easy installation.

mz185opt.jpg (2453 bytes)MZ185 This hood features the 4-3/4 high outlaw cowl induction scoop. This hood will give your drag racer or street machine 4-3/4 inches over a stock hood. Designed to bolt to hinges, and bolts are included. Rolled edges on all sides allows for easy installation.
       
       
                 LogoH100opt.jpg (1974 bytes)  
       
       
  MZ187 & MZ187T
  This hood features the 7 high outlaw cowl induction scoop. This hood will give your drag racer or street machine 7 inches over a stock hood. Designed to bolt to hinges, and bolts are included. (except for MZ187T),Rolled edges on all sides allows for easy installation. Has ridge in center, similar to MZ185.
 
 
 
 
 
  LogoH100opt.jpg (1974 bytes)      
           
mz-108.jpg (6240 bytes)MZ-108
Unlimited's front nose assembly is fully hand laid fiberglass. It includes front bumper and headlight housings molded in. It allows you to bolt your headlights directly into the nose piece thus eliminating the factory light mounting assembly. Has built in end flanges for mounting to front of fenders.
mz-109.jpg (5517 bytes)MZ-109
This fiberglass replica of the complete urethane rear bumper will reduce overall weight of your car by over 75 lbs. It features mounting flanges to bolt to original chassis. Spring cut-outs have been removed to help cut weight. Approx. weight is 12 lbs.

mz-286.jpg (6818 bytes)MZ-286
Well... times have changed; the old square style scoops are fading out fast. Unlimited's new hood with aerodynamic scoop is what is to come. This hood features an aero scoop which measures 44" long and a full 15" wide to cover your dual Dominators. The overall height is 8" in front and 6" in rear. This angle allows the car builder to lower front of car and still keep scoop level. Rolled edges on all four sides insure a perfect fit.

mz-107.jpg (7663 bytes)MZ-107R/L
Fiberglass doors are the ultimate in weight reduction. These doors feature a full inner structure for maximum strength and durability. Original latch and door handle as well as the stock hinges can be installed. A reverse flange is fully molded in for mounting Lexan windows. These doors are not recommended for street use. Careful attention to detail and perfect fit is why most racers prefer 'glass from Unlimited.

mc-825b.jpg (6603 bytes)MC-825R/L
Front inner fenders for Monte Carlo. Replica fiberglass for long lasting use. Will not rust out and resists dings and dents. Bolts to original locations.

 

LogoH100opt.jpg (1974 bytes)

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made!

mc-828.jpg (5737 bytes)MC-828 & MC891
This cowl induction hood will give that extra 2-1/4" clearance needed for high rise carburetion. It will also allow fresh air breathing from the windshield, improving performance and mileage. Small steel threaded inserts are firmly molded in for bolting to hinges. Molded edges on all sides insure perfect fit without sanding or grinding. Cowl induction scoop is replica of 69 Camaro. Full inner bracing for rigidity and support. Smooth gelcoat finish for quality appearance and durability. Rear section of scoop has panel molded in to eliminate drooping. Low weight fiberglass hoods reduce overall weight of the car, thus improving mileage and handling. For front latch style, order MC891.

ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright 2013 Unlimited Products. All rights reserved.
Follow us on FaceBook at "Unlimited Fiberglass"

Copyright 2007 Unlimited Performance Products. All rights reserved. UP22.com, UnlimitedProducts.com, RaceHoods.com