ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER | CUSTOMERS COMMENTS
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)
   
               

               
         
         
         
         
 

PR6 Boss Pro

   

PR2 Challenger T/A
(Available with inside mounting flange PR23)

   

Page1  Page2 
Page 3

Most All Scoops
 Shipped Via UPS

You are on Page #3.....Misc. Scoops
 

Unlimited Products (760) 948-0055
Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

PR-51 NEW!    $139.95

                       
Cowl induction styles, Scoop page #1 ----> ScoopsPage1.gif (2280 bytes)
Misc. scoops, old styles...etc., Scoop page #2 ---->ScoopsPage2.gif (2248 bytes)
Part
No.
Click on Photo for detail Scoops Notes Racer Net ($) BUY
SC-110 Thunderbird Bubble (Large Shelby) 3" high x 13" wide. "Outside mounting flange". 15" wide in front  including mounting flange. ups 39.00
SC-110-3 Thunderbird Bubble (Large Shelby) 3-1/2 high x 13" wide opening at base. "Internal mounting flange" ups 59.95
SC-170 DAYTONA IROC HOOD SCOOP 2-1/2" high, 57" long, 36" wide at back (shipped by truck only) Truck 159.95
SC-502 2 Lane Black Top Scoop, 14-1/2 Wide x 23 Long (at base) x 7-1/4 Hi, with internal mounting flange.   129.95 Call to order
SC-555 Stinger Scoop ups 85.00
SC-555-3 Stinger Scoop, with inside mounting flange ups 135.00 Call to order
PR-1 7" HIGH OLD STYLE PRO-STOCK (13" wide) ups 99.00
PR-2 CHALLENGER T/A SNORKEL (70-74 Challenger) (26" wide) ups 179.95
PR-23 CHALLENGER T/A SNORKEL (70-74 Challenger), with inside mounting flange (26" wide) ups 229.95 Call to order
PR-3 5" HIGH OLD STYLE PRO-STOCK (10" wide) ups 55.00
PR-45 2 PIECE SNORKEL 5" HIGH (14" wide) ups 189.00
PR-47 2 PIECE SNORKEL 7" HIGH (14" wide) ups 189.00
PR-47A   2 PIECE SNORKEL 7" HIGH WITH 5 DEGREE ANGLE BASE(14" wide) ups 189.00
PR-5 SIX PACK SCOOP (69-69 ROAD RUNNER STYLE)(24" wide, 4-1/2 tall) ups 99.00
PR-51 Six Pack Scoop for Mustangs. 27" wide x 26" long x 2-1/2" high. Inside flange and curved for exact fit on 65-66 Mustangs ups 139.95
PR-53 SIX PACK SCOOP (69-69 ROAD RUNNER STYLE)(24" wide, 4-1/2 tall), internal bolt on style, has inside flange so bolts will not show. ups 139.95
PR-6 BOSS PRO ('69 429 MUSTANG) 4" HIGH (EXTERNAL MOUNTING FLANGE)(22" wide) ups 79.00
PR-63 SAME AS PR-6 BUT HAS INTERNAL MOUNTING FLANGE(22" wide) ups 125.00
PR-82E Eleanor Scoop 25" wide x 35" long x 2-1/4" high (outside flange) As seen in gone in 60 ups 79.00
PR-7

INDY SCOOP 2" DEEP NACA DUCT 9 1/2 X 7 ups 25.00
PR-71 INDY SCOOP 3/4" DEEP NACA DUCT 7 X 5 1/4 ups 25.00
PR-94 Dual Ram-Air contoured for 94-02 S-10 hood ups 149.95
PR-8 4" HIGH OLD STYLE PRO-STOCK SCOOP(8" wide) ups 49.00
TOP-1 TOP ONLY FOR PR4'S 25" LONG 2 1/4" HIGH ups 99.00
TOP-2 TOP ONLY FOR PR4'S 25" LONG 3 1/2" HIGH ups 109.00
TOP-3 TOP ONLY FOR PR11, PR13, PR16 2 1/4" HIGH ups 119.00
TOP-4 TOP ONLY FOR PR11, PR13, PR16 3 1/2" HIGH ups 119.00
PR-9 L-88 COWL INDUCTION SCOOP 49 1/2" LONG, 3 1/4" HIGH (24" wide) ups 89.00
PR-11 2 PIECE 5" WINDSHIELD SNORKEL 43" LONG (BASE & TOP) ups 229.00
PR-12 5" HIGH OLD STYLE PRO-STOCK SCOOP (13" Wide) ups 65.00
PR-13 2 PIECE 7" WINDSHIELD SNORKEL 43" LONG ups 229.00
PR-16 2 PIECE 9" WINDSHIELD SNORKEL 5 DEGREE ANGLE ups 229.00
PR-19 L-88 SCOOP 41" LONG 2 3/4" HI (14" Wide) ups 79.50
DS-125 AERO-DRAG SCOOP 21" HIGH ups 119.95
SC-IN   SCOOP INSTALLATION: We will install most scoops into our hoods.. approx. *$175 (call for exact quote) *175.00

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made! New scoops are being added to our product line. Check with UP22.com

SC-110
Replica scoop of the 57 T-bird. It has exterior flange for mounting to the hood of your choice. Straight cut inlet provides a clean look.
13" wide opening. With flange 15" wide.

                  SC110optH.gif (1949 bytes)

SC-110-3 Same size as SC-110 above( 3" tall). Replica scoop of the 57 T-bird. It has interior flange for mounting to the hood of your choice. Straight cut inlet provides a clean look. Mounting hardware and instructions are included. 13" wide opening at base.

Bottom view of SC110-3 showing internal mounting flange. Opening in front is 13" at base and 3" high.
SC-555 Stinger Scoop

PR-1
Our largest old-style Pro-Stock scoop. It will cover the largest carburetion system. It has a roomy 7 inch clearance and a length of 40 inches. This scoop will help the nostalgia racer complete his muscle car.
          pr1opth.gif (3162 bytes)
PR-2 Outside mounting flange.
This replica is the rare Challenger T/A hood scoop. Full open interior allows maximum clearance for your carburetion. Exterior flange permits user to fasten to hood by using rivets or sheet metal screws. Rear section (20" long) allows 21-1/2" width clearance underneath. Rear, overall width is 28-3/4" (including "Outside" mounting flange).

         pr2opth.gif (3038 bytes)

PR-23 Same as PR2, but has INSIDE mounting flange.
Bolts included.
This replica is the rare Challenger T/A hood scoop. Full open interior allows maximum clearance for your carburetion. Interior flange permits user to fasten to hood by using rivets, sheet metal screws or bolt kit included. Rear section (20" long) allows 21-1/2" width clearance underneath.

 

 
PR-3
This is a smaller version of the PR1. This scoop features a height of 5 inches and a length of 31 inches. Full open interior will aid in covering the older style tunnel ram manifolds.

   pr3opth.gif (2532 bytes)

PR-45
This scoop offers a full 5 inch clearance. Snorkel scoop has external flange for mounting. Scoop is supplied in 2 pieces. Scoop top has flared opening for maximum air intake.

PR-45pr-45optl.gif (2486 bytes)

PR-47
Same features as PR45. Has external flange for mounting and is supplied in 2 pieces: base for mounting to hood and snorkel top for air intake. Additional height (7 inch total) allows clearance of higher carbs and manifolds.

PR-47pr-47optl.gif (2658 bytes)

PR47A
Same features as PR47. Has external flange for mounting and is supplied in 2 pieces: base for mounting to hood and snorkel top for air intake. Additional height (7 inch total) allows clearance of higher carbs and manifolds. Base has 5 degree angle.
No Photo
PR-12
Wider version of the old style pro-scoop. This scoop can be riveted or bolted to any hood. Outside mounting flange provides for easy bonding to give that molded in look.
           pr12opth.gif (2974 bytes)
PR-8
Old style mini-pro scoops are still popular for the restoration of muscle cars. This scoop is open in the front and has an external flange for riveting, bolting or molding in.
           pr8opth.gif (3168 bytes)
PR-5
This is a replica of the original 69 Road Runner six pack scoop. It features rolled inlets for that clean look. Full external flange helps in mounting. It will mount to a steel or fiberglass hood of your choice.
Width in front is 28 (30 including mounting flange)
Width in rear is 24 (26 including mounting flange)
Front height is 4-1/2
Rear height is 2-1/4
Opening size is 3-1/4
              
               pr5opth.gif (2700 bytes)
PR-51
Mustang Scoop. Curved for PERFECT fit on 1965 and 1966 Mustangs.

27" wide in front
24-1/2" wide in rear
Overall length 27"
2-1/2" high in front
1" high in rear
Bolt on length 26"
Bottom flange 2" wide

 
PR-51

Specs on bottom "Curve"
Front 7/8" curve. (Center is 7/8" higher than sides to fit 65-66 Mustang hood).
Side 1/8" curve.  (Center is 1/8" higher than front/back to fit 65-66 Mustang hood).
Rear 5/16"curve.  (Center is 5/16" higher than sides to fit 65-66 Mustang hood).

PR-51  
PR-53 ..same dimensions as PR-5 but has internal flange for mounting. Bolts are included with PR-53 only. Bolts will not show.

 

 

                   
     
     
     
     
     
     
     
     
                   
    Dimensions outside of mounting flange  
       

PR53

     
                   
PR-53..Back side...Showing inside flange for mounting. Flange / base area has slight curve for an extremely close match to the contour of most hoods. Mounting hardware and instructions are included. 

                   
     
     
     
     
     
     
     
     
                   
    Dimensions inside of mounting flange  
       

PR53

     
                   
                   
PR-6
This scoop is a replica of the '69 429 Mustang Boss pro scoop. It is 4 inches high and is fully open in the front. Mounting can be done with bolts or rivets. Mounting flange is external, but this scoop can be molded into the hood if desired.

              pr6opth.gif (2414 bytes)

PR-63
Scoop replica of the 429 Boss Mustang. Same as PR-6 but it has an internal flange for easy bolting to steel or fiberglass hood. Bottom flange has a slight curve to match the exact contour of the 69-70 Mustang hood, but will fit other hoods. Gel coat finish for easy prep before painting. Dimensions are the same as PR-6.

.Bottom View of PR-63
Mounting bolts and instructions are supplied with this scoop.

          

          pr63opth.gif (2589 bytes)

PR-82E "Eleanor" scoop as originally seen on the 67 Mustang GT. Front is not open. This scoop features an additional external flange for mounting to a steel or fiberglass hood. Smooth grey gel coat finish for easy painting. Hand laid for long life and durability.
Width  28" rear / 29" front
Length 35"
Height at front 2-1/4"
 

    

PR-7
Designed to be molded flush into any hood or body panel so that the scoop is indented into the surface. Originally these were called NACA ducts. Air will be drawn into the scoop but the scoop doesn't protrude out from the body panel to cause wind resistance. 1 inch flange on 3 sides.

                pr7opth.gif (2175 bytes)

PR-71
Smaller version of PR7 NACA duct. 3/4 inch deep. Designed to be molded into a body panel and to set below the body panel surface so as not cause additional air drag, yet provide a passage for air intake for cooling or carburetion. 3/4" flange on 3 sides.

                  pr71opth.gif (2225 bytes)

PR-19
Similar to the PR9 L-88 but is sized down for proper fit to smaller hoods. It is approx. 1/2 inch shorter in height, 2 inches narrower and 8 inches shorter in length than the Standard- full size L-88 scoop. It has full external mounting flange and can be easily bolted or riveted to any hood.

pr19opth.gif (2782 bytes)     

PR-9
L-88 scoops are still in great demand. Unlimited Products has the best molds in the industry for this scoop. Open in the rear to act as a cowl induction scoop, it offers air intake from the high pressure area at the base of the windshield. Most customizers mold this scoop directly to the hood. It can also be riveted or bolted to the hood. Overall width including flange is 27 inches. Inside at base is 24 inches, upper portion is 16-1/2 wide.

            pr9opth.gif (2652 bytes)

PR-11
Open front and back, this two piece snorkel scoop offers 5 inches overall height.

PR-11pr-11optl.gif (2547 bytes)

PR-13
Same as PR11 but is 7 inches in overall height. Scoop base has flange for bolting or molding into hood. Scoop top is separate and has full internal base flange for mounting to the upper portion of the base. These internal flanges allow use of an air pan kit for proper sealing of air intake. Windshield snorkels are necessary when engine is moved back. The scoop can be positioned near the windshield to take advantage of the high pressure at the windshield base.
pr-13optl.gif (3424 bytes)

PR-13

 

LogoH100opt.jpg (1974 bytes)

PR-16
Same as PR13 but has a 5 degree angle built in. This angle puts the front of the scoop at 9 inches above the hood and the rear will be 6 inches high. This also allows the scoop to be used on cars with a great deal of rake.
pr-16optl.gif (3743 bytes)

 

PR-16

DS-125
New Aero-Drag scoop. Features 21 1/2" overall height. Designed to be mounted to carburetor air pan tray. Base is 19" x 11 1/2". Opening is 45 square inches. Rounded inlet provides for maximum air intake. Aerodynamic shape reduces drag. Contoured rear interior helps to maintain air flow.
             DS125optH.gif (3264 bytes)
TOP-1
This scoop "top" can be purchased separately. It is the top section of the standard snorkel scoop. Unlimited's snorkel scoop tops offer flared inlet for maximum air intake and to give support to the front edge of the scoop opening. This extra support eliminates the need for a center support bolt, thus eliminating the "hardware store" look.

TOP-1top1-optl.gif (1553 bytes)         

 

 

TOP-2
This is the same as TOP1 but it is 3 1/2 inches tall. This is our BIG GULP style and allows more air flow and extra carb clearance. It can be exchanged and installed in place of the TOP1. As with all Unlimited's scoops, it is fully hand laminated.



top-2optl.gif (1467 bytes)

TOP-2

TOP-3
This top section can be purchased separately. It is the top section only for PR11, PR13, and PR16. It has a fully enclosed bottom flange. This makes it easy to cut the air flow hole to the exact position needed when moving the engine back. All Unlimited's snorkels have a flared inlet for increased air intake, and to insure that the front edge of the scoop maintains its shape without drooping.

top-3optl.gif (2077 bytes)
LogoH100opt.jpg (1974 bytes)

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made! New scoops are being added to our product line. Check with UP22.com

TOP-4
This is the same as TOP3 (top for the windshield snorkel scoops) but it is 3 1/2 inches tall. This is the BIG GULP style and allows more air flow and extra height for taller carburetion. As with all Unlimited's scoops, it too is fully hand laminated for long life and high strength.
top-4optl.gif (1987 bytes)
SC-170
Replica of early style I.R.O.C. Daytona hood scoop. Side vents are cut out to proper size. Overall length is 57-1/2" Width at widest point (near back) is 36-1/2" (39-1/2" including mounting flange). Has external flange for mounting to steel or fiberglass hood. Front has slight curve downward to match hood contour. Contour matches 82-92 Camaro. Indents are designed for installing factory (82-92 Camaro) louver panels.
sc170optl.gif (3468 bytes)
PR-94 Dual Ram-Air scoop. Contoured to fit 94-02 S-10 and S-15 hood. Scoops are 8 inches wide x 1-1/4 high. Overall height at rear is 1-1/2 inches. Width of 'scoop' at rear is 32-1/2. Overall width, including flange is 37-1/2 wide at rear. 40 inches long.

 

 

 

 

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA. You can pick up items (call ahead) or just browse our huge factory. You can request to see our lay-up shop and see how our products are made! New scoops are being added to our product line. Check with UP22.com

SC502

2 Lane Black Top Scoop. Features internal flange for easy mounting. Front bottom edge has notch for perfect fit to 55 Chev hood.

   

Older style scoops Page #1-->
Aero Scoops Page #2--> ScoopsPage2.gif (2248 bytes)

Click Here----> Scoop Install Procedure
ABOUT | TECH INFO | Q&A  | CATALOG | SHIPPING | CONTACT | HOW to ORDER
index.gif (1853 bytes) GetCatalog.gif (3117 bytes) ShipCharges.gif (2148 bytes) online3.gif (4005 bytes)

Toll Free (877) 735-7772 (7:00 to 4:30 Pacific Time) Mon-Fri

 


Questions about our products, shipping costs, current prices and sales policies can be obtained by calling:
Toll Free (877) 735-7772 or From Canada or other countries - (760) 948-0055
Copyright 2014 Unlimited Products. All rights reserved.
Follow us on FaceBook at "Unlimited Fiberglass"